The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   NP435G. Free Free Free in Ohio (https://67-72chevytrucks.com/vboard/showthread.php?t=853057)

1967GMCC20 06-14-2024 03:54 PM

NP435G. Free Free Free in Ohio
 
Guys,

Nice NP435G I took out, will not use in future. Worked great, was behind 67 V6 GMC engine.

FREE FREE FREE

OR ITS GOING IN SCRAP PILE.

'68OrangeSunshine 06-14-2024 07:03 PM

Re: NP435G. Free Free Free in Ohio
 
Too bad I'm a long long long way from Ohio.

1967GMCC20 06-14-2024 07:05 PM

Re: NP435G. Free Free Free in Ohio
 
Western US always looking. Over here they won't drive 3hrs.
If you can locate a hamber, or transport going that way.

Truck it came out of, from Banning California.

'68OrangeSunshine 06-14-2024 07:59 PM

Re: NP435G. Free Free Free in Ohio
 
I'm in Tucson Arizona.

Curious how the NP 435G differs from the SM 420 and 465? I run the SM 465 in my C/10 Stepside, behind a 292, and a 465/NP 205 behind a 350 in my '71 GMC Jimmy. Also I have an SM 465/Rockwell T221, and a 2wd SM 465, both cores.

1967GMCC20 06-14-2024 08:32 PM

Re: NP435G. Free Free Free in Ohio
 
Only major difference is the NP435G is a true 4spd. Not the 3spd with granny gear.

NP435G has a 4 something first gear. See link below.

Few other minor differences.

1967GMCC20 06-14-2024 08:36 PM

Re: NP435G. Free Free Free in Ohio
 
NP435G

https://www.novak-adapt.com/knowledg.../manual/np435/

1967GMCC20 06-14-2024 08:39 PM

Re: NP435G. Free Free Free in Ohio
 
SM420

https://www.novak-adapt.com/knowledg.../manual/sm420/

1967GMCC20 06-14-2024 08:42 PM

Re: NP435G. Free Free Free in Ohio
 
Novak site is really good. You will see the NP435G is the only synchronized 1st gear. Also used least amount of years in GM.

1967GMCC20 06-15-2024 10:06 AM

Re: NP435G. Free Free Free in Ohio
 
1 Attachment(s)
Np435g 1967

Wrenchbender Ret 06-15-2024 11:02 AM

Re: NP435G. Free Free Free in Ohio
 
The New Process 235 was used mostly in Dodge trucks. It is part of the Mopar company.
The early models back in the 60's had lousy synchronizers. The flimsy pins that held them together often broke & were very expensive to get new ones. The aluminum cover also caused trouble & were hard to work on. The SM 465 was one rugged transmission & the SM420 was good too.

George

1967GMCC20 06-15-2024 11:28 AM

Re: NP435G. Free Free Free in Ohio
 
Quote:

Originally Posted by Wrenchbender Ret (Post 9319551)
The New Process 235 was used mostly in Dodge trucks. It is part of the Mopar company.
The early models back in the 60's had lousy synchronizers. The flimsy pins that held them together often broke & were very expensive to get new ones. The aluminum cover also caused trouble & were hard to work on. The SM 465 was one rugged transmission & the SM420 was good too.

George

Ford used them too. Looks like chevy, GMC only a few years.
With 170hp V6 could not break it. V6 went to a 67 4x4 restoration.
Removed for BBC AUTO conversion.

Novak site has good info and stats.

kwmech 06-15-2024 12:18 PM

Re: NP435G. Free Free Free in Ohio
 
Not sure about the G designation, but I've got one sitting here also. Came out of my 68 C20 that had a 396 in front of it. It does have the 4-1 first gear.. I've got a rebuild kit for it also. Have no idea what to do with it. Have the bell housing and the sheet metal with it also. I took it out to put in a 465 with a Ranger OD in front of it

factorystock 06-15-2024 12:37 PM

Re: NP435G. Free Free Free in Ohio
 
Was known as the close ratio 4 speed, new option for GMC in '66. 1 st gear is a semi granny, not used for regular stop and go. New option for Chevy in '67. It is a direct replacement for the SM 420. '48-'67. This 435 has the small input retainer pre 68. Rare early style tranny and desirable for those who know. I'm sure many '48-'66 owners would love to dump the noisy( even when new) SM 420's

1967GMCC20 06-15-2024 04:12 PM

Re: NP435G. Free Free Free in Ohio
 
Quote:

Originally Posted by factorystock (Post 9319580)
Was known as the close ratio 4 speed, new option for GMC in '66. 1 st gear is a semi granny, not used for regular stop and go. New option for Chevy in '67. It is a direct replacement for the SM 420. '48-'67. This 435 has the small input retainer pre 68. Rare early style tranny and desirable for those who know. I'm sure many '48-'66 owners would love to dump the noisy( even when new) SM 420's

Knowledgeable. Yes a neat trans. GMC

I have V6 crossmember and mounts as well.

'68OrangeSunshine 06-15-2024 07:11 PM

Re: NP435G. Free Free Free in Ohio
 
The Bellhousing for the SM 465 is GM P/N: 3925505 w/5-1/8'' I.D.
For the SM 420 -- GM P/N: 3815891 w/ 4-9/16'' I.D.

1967GMCC20 06-15-2024 07:24 PM

Re: NP435G. Free Free Free in Ohio
 
I can check it, pretty sure it is smaller than Chevy, when I was teetering on using with 402. With manual, needed special bell hsg. Then went with Automatic.

Getter-Done 06-15-2024 09:55 PM

Re: NP435G. Free Free Free in Ohio
 
I am 7 hours away from you.

I can't stray that far from home. :lol:

1967GMCC20 01-20-2025 07:57 PM

Re: NP435G. Free Free Free in Ohio
 
Finally it found a home. Guy drove out 1.5hr, gave him extra cross members, chevy V8 bell housing to fit NP435G..


All times are GMT -4. The time now is 11:22 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com