71 C10 partout
 

I have what is left of a 71 C10 for sale

The rear end is not for sale and I believe the front suspension cross member is already spoken for.

250 6 Cyl (spins freely) complete with engine harness, motor mounts, 3 spd manual transmission, clutch linkage assembly, accelerator cable and starter. Only thing that was missing was the air cleaner. $250 for everything local pickup

clutch/ brake pedal assembly $50 plus shipping
Front painted bumper $125 local pickup
Hood Hinges $85 shipped have several sets
Manual brake disc/drum proportioning valve can include little brake lines no MC $35 shipped SOLD
5 lug rims $25 each plus shipping
Cowl (also have 20+ more) $40 plus shipping
Front grill Inner grill has some breaks in it $200 prefer local pickup
Charcoal canister $50 plus shipping
Dash harness is there but has been cut. will sell complete or specific plug pigtails
dash cluster $40 plus shipping (have others as well no tach)
Glove box door (have lots of others as well) $25 plus shipping for this one
gas pedal assembly (no cable)
I am still checking condition of trailing arms and cross members. The frame is in really poor shape. May be able to salvage front horns on frame but that is all I would trust.

If you need specific pictures just ask

Re: 71 C10 partout
 

truck also had a set of 66 Chevelle hubcaps on it that are in 100% better condition than the truck :lol: I would sell them as well. I have seen prices all over the place so i will put $300 shipped on them


.

Re: 71 C10 partout
 

I'll take the proportioning valve

Re: 71 C10 partout
 

After looking at it closer, even the little lines were no good here are some closer pictures of it. If you want it my PP link is in my signature. Thanks

.

Re: 71 C10 partout
 

Looks good. I'm going to send it out to have it rebuilt. I have a set of stainless short lines for it. Payment and PM sent.

Re: 71 C10 partout
 

How's the sheet metal below the rear window on the back of the cab?

Re: 71 C10 partout
 

The only usable pc of sheet metal on the entire truck was the cowl. I have a 67 cab sitting here but it has small back window, if that helps

Re: 71 C10 partout
 

The cab I'm working on took hits from the box on both sides. I've tried my best to work the spots out but feel if I could cut out and replace the metal I would be better off. I will try and attach a picture of what I was after.

Re: 71 C10 partout
 

I can grab some pictures of the 67 in the morning and show you what I have to see if it will help you

Re: 71 C10 partout
 

I am really needing the Throttle cable / brackets from the 6 cylinder. Would you sell them separate?
Thanks
Troy

Re: 71 C10 partout
 

does it have front drum s ?

Re: 71 C10 partout
 

Troy
I am going to keep all of that with the motor for now.

Richard

Re: 71 C10 partout
 

no it is a 71 with disc brakes. I think I may have a drum brake setup from a 68 still here though.

Re: 71 C10 partout
 

May I see the gas pedal assembly, including the firewall bracket?

Re: 71 C10 partout
 

May I see a picture of the gas pedal assembly including the firewall bracket?

Re: 71 C10 partout
 

Here it is $50 plus shipping


.

Re: 71 C10 partout
 

sorry it took so long for pics. The passenger side is damaged.Each cut would be $40 plus shipping

.

Re: 71 C10 partout
 

Paid.

Re: 71 C10 partout
 

PM sent with shipping cost

Re: 71 C10 partout
 

Spring @ #3

Attachment 2376421

Re: 71 C10 partout
 

[QUOTE=Sh2;9325557]Spring @ #3

yes it is with it.

Re: 71 C10 partout
 

Received the combination valve. Thank you.

Re: 71 C10 partout
 

pm sent

Re: 71 C10 partout
 

What type of rear bumper is that Richard?

Re: 71 C10 partout
 

It was totally rotten so i scrapped it. It had been sitting directly on the ground for 25-30 years