The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)

- - Np205/6l90e mount problem (https://67-72chevytrucks.com/vboard/showthread.php?t=853871)

1972ochre4x4

08-03-2024 07:38 AM

Np205/6l80 mount problem

1 Attachment(s)

Not sure if a 4x4 question or a lsx question

I have a 1972 k10 with 6l80 and a np205. I have advance adapters adapter. But the mount doesn’t seem to line up with mounts on crossmember, before I modify or make a spacer am I doing something wrong? Does anyone have a picture of theirs?

1972ochre4x4

08-03-2024 07:42 AM

Re: Np205/6l90e mount problem

1 Attachment(s)

Where it hits mount

Richard

08-03-2024 02:40 PM

Re: Np205/6l90e mount problem

Quote:

Originally Posted by 1972ochre4x4 (Post 9331626)

Where it hits mount

There are some pics of what I did in my build thread. Transfercase install starts on page 11. I made an adapter that raised the t-case up. Engine and trans would angle down to much without it. Also t-case would not bolt up. Actually had to modify the one I made originally and make it taller.
Edit- The initial version of the mount adapter is on page 7 post 163

All times are GMT -4. The time now is 07:21 AM.