67-68 E brake bracket rubber pads
 

Need some info on the rubber pads for the bracket that holds the emergency brake handle. Mine only has one of the square pads but there are two square holes for the pads. I didn't see anything in the search or on the LMC website. I assume it takes two not one. If someone could confirm this and point me in a direction to find them. It is about 3/4" square and about 1/2" high roughly without measuring.
Thanks
Rick

Re: 67-68 E brake bracket rubber pads
 

Bump, 81 views and no responses. I could really use some help on this.

Re: 67-68 E brake bracket rubber pads
 

I got some pictures to clarify.

Re: 67-68 E brake bracket rubber pads
 

The pads are bumpers for the clutch and brake pedals. If your truck is a manual it will have two of them. if it is automatic it will only have one.

https://classicparts.com/60-74-clutch-pedal-bumper
.

Re: 67-68 E brake bracket rubber pads
 

Sweet didn't even think about that. The truck is torn down and the cab is at the painters. Should be done in the next couple of weeks so I have been blasting and powder coating the smalls. Makes sense why there was only one and couldn't find anything under emergency brake.
Thanks BIG help.
Rick

Re: 67-68 E brake bracket rubber pads
 

No problem.
.

Re: 67-68 E brake bracket rubber pads
 

Great Information. :metal:

Re: 67-68 E brake bracket rubber pads
 

Ok I received the new bumper but all I can find for fitment on my 68 is part # RP 30-C. It is only about 1/2 the height of what was on it. Other than the brake pedal being higher is there other issues that it will cause? The master and everything is still out of the cab so the brake rod will have to be adjusted to it. Can someone get a measurement on there's
to verify the height?
Thanks
Rick