The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Is this taped trim molding available? (https://67-72chevytrucks.com/vboard/showthread.php?t=855210)

wazzabie

10-22-2024 12:42 PM

Is this taped trim molding available?

Is this taped trim molding available as a reproduction part?

https://i.ibb.co/LxXf3P2/trim.png

Getter-Done

10-22-2024 01:00 PM

Re: Is this taped trim molding available?

https://www.usa1industries.com/1981-...g-set-longbed/

Keith Seymore

10-22-2024 01:15 PM

Re: Is this taped trim molding available?

1 Attachment(s)

Quote:

Originally Posted by Getter-Done (Post 9348880)

https://www.usa1industries.com/1981-...g-set-longbed/

Since there is no photo, how does one know it is not this molding?

(especially since they show the chrome corner molding right next to it?)

K

Getter-Done

10-22-2024 03:47 PM

Re: Is this taped trim molding available?

Quote:

Originally Posted by Keith Seymore (Post 9348881)

Since there is no photo, how does one know it is not this molding?

(especially since they show the chrome corner molding right next to it?)

K

Very good point.:metal:

I Click and saved the wrong link.
This is late model Square Body trim.

They defiantly need a photo.:)

Getter-Done

10-23-2024 06:14 AM

Re: Is this taped trim molding available?

How about this?

Link: https://www.walmart.com/ip/Black-Sid...erId=101001238

wazzabie

10-25-2024 03:42 PM

Re: Is this taped trim molding available?

Quote:

Originally Posted by Getter-Done (Post 9349005)

How about this?

Link: https://www.walmart.com/ip/Black-Sid...erId=101001238

It looks like this molding however the original is less then 2in in width. This item is 2.25in in length. I guess I need to see a sample of it. Maybe the extra width is not much of an issue.

Getter-Done

10-25-2024 10:37 PM

Re: Is this taped trim molding available?

Quote:

Originally Posted by wazzabie (Post 9349541)

It looks like this molding however the original is less then 2in in width. This item is 2.25in in length. I guess I need to see a sample of it. Maybe the extra width is not much of an issue.

This was a Question I had for you and did not Type.;)

I did not know the width of your trim.

The point of the front point is the main issue.

It would maybe blend in, if you cut it carefully.

That would only be an 1/8 inch difference each side.

So, if the original point of trim was cut at an angle.

Of course, the angle would be cut (Taking wind in Consideration).

Just a thought.:mm:

All times are GMT -4. The time now is 04:32 PM.