The 1947 - Present Chevrolet & GMC Truck Message Board Network - 1981 K20 front drive shaft

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)

- - 1981 K20 front drive shaft - 2" diameter (https://67-72chevytrucks.com/vboard/showthread.php?t=855286)

GSP7	10-26-2024 03:28 PM

million dala twuck

:uhmk::jest::sexy: an nobody home:jdp::ack::ack::thud::m6::ennyd::splat::ito::eek::truck:

cadillac_al

10-29-2024 10:34 PM

Re: 1981 K20 front drive shaft - 2" diameter

yeah, 2 1/2 sounds pretty big. I have never seen one but I can see somebody making one just to be that much stronger.

Richard

10-30-2024 02:37 AM

Re: million dala twuck

Quote:

Originally Posted by GSP7 (Post 9349728)

:uhmk::jest::sexy: an nobody home:jdp::ack::ack::thud::m6::ennyd::splat::ito::eek::truck:

Deleted post after a few days? What was your concern? Replacement parts are sometimes not the same. Tube diameter has to do with velocity and length. The custom made front shaft in my 650hp+ modified K10 is 2". Bigger will not hurt anything if it fits, find another supplier if you want a smaller tube for looks.

GSP7	11-01-2024 10:45 PM

Re: 1981 K20 front drive shaft - 2" diameter

:ennyd::ack::ack::five:

All times are GMT -4. The time now is 04:32 PM.