‘67 Brake line tee
 

Does anyone know of a source for the odd ball rear brake line tee. This is for a long bed ‘67 C-10 with an Eaton rear end. Any help would be great. A used one would work as well. thanks!

Re: ‘67 Brake line tee
 

I believe it comes installed on the hose. I mistakenly ordered one from NAPA before I knew the 71-72 rear axle hoses were different.

Re: ‘67 Brake line tee
 

What's unique about it? The local napa has fittings in the store. The more info you provide, the more people have to reply.

Re: ‘67 Brake line tee
 

This is the one I am looking for!

Re: ‘67 Brake line tee
 

Side outlet tee! Mine's straight- the gozouttas are across from each other, not side by each, but it's a '70. Maybe that's another '67 only piece? Idunno. But what you would get a regular parts store probably wouldn't have the flange for the mounting clip. Maybe try a brake supply house?

Re: ‘67 Brake line tee
 

Thanks Steve,
Was able to find the side by side tee all day long. It's for my nephews truck and he is in the mid west and not real good at searching. He stripped the treads with one line. Thanks for the suggestions. More likely than not a '67 only item.

Re: ‘67 Brake line tee
 

Getting a good used one here on the forum is probably the best bet. I find that to be the case for odd parts. I suggest post a want-to-buy ad in the parts section.

Re: ‘67 Brake line tee
 

Smitty, we have added some C20 Eaton/HO52 Corporate 10 bolt coil spring rear axle brake line connector tee application info and pictures in reply #6 of the below linked thread that we had originally posted in. Have a look, Mel :chevy:

http://67-72chevytrucks.com/vboard/s...60#post9352060
.

Re: ‘67 Brake line tee
 

Mel comes through again!