The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Side trim (https://67-72chevytrucks.com/vboard/showthread.php?t=855996)

Wanting to put the side trim pieces on my long bed, anyone have any specs on location?

Do you have a 60-66 Assembly Manual? I thought there is info on that in that manual.

I have the photos from the manual on my home computer, can post tonight.

edit: this is faster:

https://67-72chevytrucks.com/vboard/...d.php?t=809932

Note, the location (horizontally) of the holes doesn't really matter. Tape out a straight line for the top, mark your holes. Measure down for the lower trim on the door, bed, and cab corner. The length of the fender trim will dictate where the spear will go. Once you get going with the tape, it starts to make sense. With tape done, tape the trim ON TOP OF THE tape, stand back and look. Your eye will tell you if everything is correct. Just keep the top line a constant distance down from the body line.

Thanks for the info….