Help with Camber Washers
 

Customer changed his a-arms on his c3500 and when he took it in for alignment, they said the cam washers were inside out/backwards. I can’t find anything on the net on what they should be. How can they tell?

Re: Help with Camber Washers
 

These arrows must mean something? Point up or down?

Re: Help with Camber Washers
 

They have to go on the outside, they won't fit on the inside, between bushing and frame.

Re: Help with Camber Washers
 

Like the pics show right? But does it matter what direction the arrows on washers point?

Re: Help with Camber Washers
 

Picture is right
I would go to a different shop if they don't know that !!
I have a 3500 with new ones on it , I will check it to be sure

Re: Help with Camber Washers
 

The arrow is just a reference point that can be used when aligning, maybe the mark is used in assembly as well. If the washer was installed with that mark not visible (washer flipped) I do not believe there is anything that would prevent the eccentric washer from doing it's job and allowing alignment.