The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Clutch Linkage 68 c/10 (https://67-72chevytrucks.com/vboard/showthread.php?t=856916)

Dude68 01-31-2025 09:16 PM

Clutch Linkage 68 c/10
 
Having trouble with clutch install. Needing the linkage clips,seats, and bushings. I see the clips and seats on LMC, but no bushings. I’m also having trouble locating a reasonably priced water pump pulley. Can someone direct me to where I may find these. LMC has been taking over a week to deliver. 3 speed on column.

pjmoreland 01-31-2025 10:42 PM

Re: Clutch Linkage 68 c/10
 
This place has some clutch linkage parts:

https://4speedconversions-com.3dcart...rts.html?amp=1

Ckassic Parts has a decent selection of clutch parts:

https://classicparts.com/catalogsear...ody_style=TRK4

You should be able to get a water pump at your local auto parts store.

Classic Bowties 02-01-2025 04:19 PM

Re: Clutch Linkage 68 c/10
 
5 Attachment(s)
Dude68, if in need of the control shift/rod grommets for your 3 pd. manual steering column, we have both the upper and lower GM NOS shift linkage grommets listed in post reply #70 of our below linked steering column parts board f/s thread, we have a limited quantity on hand of diagram #2 NOS lower control rod to shift lever grommets but have several of the #1 NOS upper column shift tube grommets and optional add on NOS inner steel bushings available. Have a look and let us know if interested. Mel :chevy:


GM NOS Upper control rod to column (auto & man.) shift tube grommets, item #1 on below parts diagram.

***If needed, add a matching GM NOS inner steel shift bushing to the above shift tube grommet***

GM NOS Lower control rod to 3 spd. manual trans shift lever grommets, item #2 on below parts diagram


http://67-72chevytrucks.com/vboard/s...=838093&page=3

.

Dude68 02-01-2025 05:04 PM

Re: Clutch Linkage 68 c/10
 
I am interested Need 2 of each plus the inner steel bushing. Also have same type stuff on clutch pedal rod under dash. Are these same size?


All times are GMT -4. The time now is 07:46 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com