The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)
-   -   Need Driveshaft Length Please (https://67-72chevytrucks.com/vboard/showthread.php?t=857025)

chevychase 02-05-2025 10:08 AM
Need Driveshaft Length Please
 
I’m looking to pick up a 1993 regular cab short bed frame. He has several driveshafts sitting there but doesn’t know which one is which.

Can someone please tell me dimensions I should measure and where I should measure from?

Second Series 02-05-2025 01:33 PM
Re: Need Driveshaft Length Please
 
Measure from the Bearing cap to Bearing cap of the spider on each end. I just checked on my '90 regular cab short bed. It measures 41", the transfer case is 10". I could guess 51" for a 2 wheel drive truck, that's with the manual transmission and 5.7 v8. The Yoke slip section is 5" so there's some wiggle room there.

chevychase 02-07-2025 12:44 AM
Re: Need Driveshaft Length Please
 
Quote:
Originally Posted by Second Series (Post 9367925)
Measure from the Bearing cap to Bearing cap of the spider on each end. I just checked on my '90 regular cab short bed. It measures 41", the transfer case is 10". I could guess 51" for a 2 wheel drive truck, that's with the manual transmission and 5.7 v8. The Yoke slip section is 5" so there's some wiggle room there.
I Super appreciate the extra mile you put forth getting those measurements


All times are GMT -4. The time now is 04:04 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com