The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Were three point seatbelts part of a package? (https://67-72chevytrucks.com/vboard/showthread.php?t=857098)

IT Cowboy 02-10-2025 08:34 AM

Were three point seatbelts part of a package?
 
My Highlander truck has holes in the B pillars for seatbelts but there are none there and I only have lap belts. Were the three point belts part of a package or did they put the mounting holes for them in all trucks

1970cstblazer 02-10-2025 08:44 AM

Re: Were three point seatbelts part of a package?
 
They were a VERY rare option on these trucks. RPO code A85. Not a part of a package. Stand alone option. Could get them front and rear on Blazers and Suburbans too.

IT Cowboy 02-10-2025 08:51 AM

Re: Were three point seatbelts part of a package?
 
I have a "1B8530 - Belt Molding" listed on the glovebox sheet.

leddzepp 02-10-2025 09:10 AM

Re: Were three point seatbelts part of a package?
 
Belt molding refers to upper and/or lower trim on the exterior of the truck. Shoulder belts were a stand alone option but were not 3 point. They were separate harnesses and a pain in the butt to use so the option was not often ordered.

TKCR 02-10-2025 09:35 AM

Re: Were three point seatbelts part of a package?
 
All the trucks came with the holes already in the pillar, that even included the 1973-1975 square body trucks, which were also 2pt lap belts. You could order 3pts. It wasn’t until 1976 that 3pts were installed in all the trucks.

Rich69shortfleet 02-10-2025 09:41 AM

Re: Were three point seatbelts part of a package?
 
Quote:

Originally Posted by leddzepp (Post 9368799)
Belt molding refers to upper and/or lower trim on the exterior of the truck. Shoulder belts were a stand alone option but were not 3 point. They were separate harnesses and a pain in the butt to use so the option was not often ordered.

Yes, because the shoulder belt did not have a retract feature so it was hard to lean forward with the belt on if it was adjusted correctly.

IT Cowboy 02-10-2025 10:12 AM

Re: Were three point seatbelts part of a package?
 
As I posted, my truck has holes for the shoulder belts so I wondered if someone added them and then someone else removed them to return it to the original or it the belts were originally there at one time I haven't looked close but it looks like the holes in the pillar were stamped in as they have a small notch to them and do not look drilled recent meaning they were painted over when the repaint was done on the truck.

too much stuff 02-10-2025 10:20 AM

Re: Were three point seatbelts part of a package?
 
Quote:

Originally Posted by IT Cowboy (Post 9368805)
As I posted, my truck has holes for the shoulder belts so I wondered if someone added them and then someone else removed them to return it to the original or it the belts were originally there at one time I haven't looked close but it looks like the holes in the pillar were stamped in as they have a small notch to them and do not look drilled recent meaning they were painted over when the repaint was done on the truck.

All of the trucks have those holes. They usually have a plastic plug covering them up.

IT Cowboy 02-10-2025 10:22 AM

Re: Were three point seatbelts part of a package?
 
Quote:

Originally Posted by too much stuff (Post 9368808)
All of the trucks have those holes. They usually have a plastic plug covering them up.

Ahh, that makes more sense then and that is what I was wondering.

leddzepp 02-10-2025 10:52 AM

Re: Were three point seatbelts part of a package?
 
Quote:

Originally Posted by Rich69shortfleet (Post 9368802)
Yes, because the shoulder belt did not have a retract feature so it was hard to lean forward with the belt on if it was adjusted correctly.

Yep, just a vertical lap belt. I added them to my truck but never used them for that reason :lol:


All times are GMT -4. The time now is 09:28 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com