'81 Cowl screen plastic
 

https://lmcnopstorage.blob.core.wind...reen_73_87.png
https://www.speedwaymotors.com/_next...jpg&w=750&q=75

Im about to clean under my Cowl and cowl screen

What holds the plastic screen in place after you pull off the metal cowel vent piece?


Does it have those plastic push in plug thing-ma-jigs that Ill have to pry out and replace?

Or is it just laying there free once I take the metal cowl off?

https://encrypted-tbn0.gstatic.com/s...1dQblt-lqX_Fcn







/

Re: '81 Cowl screen plastic
 

My '86 is held in place by screws such as shown in pic. - items 6 & 7. Some were missing so I just matched a OG screw from ACE hardware. I suppose you could use the plastic push ins.