Iso threads adding u joints to steering column 64 c10
 

Hi guys , I'm back after 10 years, pls direct me to threads where they re route the steering column. I can't find any for some reason,

Ty

Re: Iso threads adding u joints to steering column 64 c10
 

https://67-72chevytrucks.com/vboard/...d.php?t=814647 here's one

Re: Iso threads adding u joints to steering column 64 c10
 

Re: Iso threads adding u joints to steering column 64 c10
 

Re: Iso threads adding u joints to steering column 64 c10
 

Thank you sir. I'll read it now!

Re: Iso threads adding u joints to steering column 64 c10
 

Any others ? Thank you but that thread didn't show what I need,

Re: Iso threads adding u joints to steering column 64 c10
 

More info on what your issue is might provide more responses.

What is it you're trying to overcome?

Re: Iso threads adding u joints to steering column 64 c10
 

Ty for response, great info. I'll go grab pics now sir.

Re: Iso threads adding u joints to steering column 64 c10
 

Here's where I'm at up front.

. Z frame. Pancake cm. Cupped lcas. Notched upper control arm. Raised steering, raised engine/trans.

Notching the uca for the steering didn't give me clearance when the truck is aired down.

Looking for info on how to brace the shaft. I have 2 u joints that fit nice,


Thank you

Re: Iso threads adding u joints to steering column 64 c10
 

Make a plate that goes over the upper A-arm shaft hardware (between the frame mount & the a-arm shims), bolts to side of the frame rail, or possibly a suitable spot on the horizontal portion of the frame rail. Drill a hole & mount an adjustable rod-end type of bearing that the shaft slides through for the needed support.

https://www.youtube.com/watch?v=xixXFpSp8Og

Re: Iso threads adding u joints to steering column 64 c10
 

Scotti thank you for your time sir. Do you know where I can get one of those bearing mounts by chance? Or if I knew the name of them I could search for them.

Tyvm

Re: Iso threads adding u joints to steering column 64 c10
 

I don't have any info in front of me but try searching for 'steering shaft support bearing' & browse the images for possible sources.

Re: Iso threads adding u joints to steering column 64 c10
 

Heim Joint

Re: Iso threads adding u joints to steering column 64 c10
 

Thank you rideblue. I'm on it now

Re: Iso threads adding u joints to steering column 64 c10
 

Thank you rideblue!

Searching now