The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Stubborn series 56 connector (https://67-72chevytrucks.com/vboard/showthread.php?t=857758)

vettefan93105

03-15-2025 08:32 PM

Stubborn series 56 connector

Pretty basic stuff here, but HELP! Installing new M and H dash harness, all going smoothly but can't open the connector at the firewall between the existing (old) dash harness and the (old) engine harness. Presume it's a typical series 56 male/female (four wire) connector. Well lubricated..?need special tool to release? Would rather not pull the whole rubber grommet through the firewall. Any advice appreciated.

Getter-Done

03-15-2025 08:46 PM

Re: Stubborn series 56 connector

Here's a video

Link:

Remove 56 Series Terminals From The Connector \|...

Hope this helps.
:chevy::chevy::chevy:

All times are GMT -4. The time now is 04:45 PM.