The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Looking for 1983 C-10 Jack Instruction Decal (https://67-72chevytrucks.com/vboard/showthread.php?t=857885)

Getter-Done 03-22-2025 07:34 PM

Looking for 1983 C-10 Jack Instruction Decal
 
1 Attachment(s)
I have searched all the normal places that have the restoration decals.

I bought an Original jack and handle and lug wrench for my Nephews 83 1/2 ton today.

There is part of the sticker left on the fender well.

Does anyone know of a source for the later Square Body under hood stickers?

Some of the Early Square body stickers are available.
They seem to stop at 1977.

Here is a Picture of what he has left of his current sticker.
It is a Canadian built truck that was sold New in Tn.

Attachment 2417376

balljp 04-03-2025 10:50 PM

Re: Looking for 1983 C-10 Jack Instruction Decal
 
2 Attachment(s)
Getter-Done,

I've been on the hunt for the same jacking instruction decal for the 80-84 models for over a year now, and unfortunately, I haven't had any luck—I've even reached out to the heritage center. It seems like these decals are just not sold.

To assist in your search, I've attached a picture that should help you identify the part number. In my case, it's the 14032840 decal.

If you find any leads, please let us all know!

Thanks so much!

Joe

Getter-Done 04-04-2025 06:04 AM

Re: Looking for 1983 C-10 Jack Instruction Decal
 
Thanks for that information.

Yes If I do find it I will post it Here.:chevy::chevy::chevy:

TommyGuns 05-06-2025 11:33 PM

Re: Looking for 1983 C-10 Jack Instruction Decal
 
Here is the decal in my 1983. Its worn, I'd like to replace it, but it is nearly intact. Maybe someone talented can reproduce it?

https://imgur.com/a/3VNms3k

Getter-Done 07-15-2025 11:29 PM

Re: Looking for 1983 C-10 Jack Instruction Decal
 
Quote:

Originally Posted by TommyGuns (Post 9384109)
Here is the decal in my 1983. Its worn, I'd like to replace it, but it is nearly intact. Maybe someone talented can reproduce it?

https://imgur.com/a/3VNms3k

Thanks :metal: for the Picture.

I got a Sticker in the works.

I hope they do a good job. :chevy::chevy::chevy:

old Rusty C10 07-16-2025 05:17 PM

Re: Looking for 1983 C-10 Jack Instruction Decal
 
i used to get them from LMC dont know if they still make em

Getter-Done 07-16-2025 07:05 PM

Re: Looking for 1983 C-10 Jack Instruction Decal
 
Quote:

Originally Posted by old Rusty C10 (Post 9394452)
i used to get them from LMC don't know if they still make em

If they did sell them, they no longer sell this particular one.

Every Supplier that I have check with has a Gap in the Decals they offer.

From 1980 to 1984 there is not a supplier that I have found.

I have enough pictures and a Decal at the print shop in town.
They are working on a Re-Print for the Part# 14032840.

With the List that Member balljp supplied above in post #2,

It appears that there are 8 labels in the 1980-1984 that are not reproduced.

My Nephews is a label that is printed in Canada.

I will be Happy with a Reprint with just the basic info from the info I have acquired.

Getter-Done 08-01-2025 11:28 PM

Re: Looking for 1983 C-10 Jack Instruction Decal
 
1 Attachment(s)
The print shop finally got these done.




Attachment 2428011


All times are GMT -4. The time now is 04:36 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com