Double Pulley For 250
 

I added power steering to a 67 with stock 250 and am having trouble finding a double pulley for the water pump. Stock was 2-3/4” deep and the two I’ve bought were 2-5/8 so doesn’t line up with the crank pulley.

Re: Double Pulley For 250
 

The Harmonic Balancer for the 292 had an integral crank pulley. They came in 2-Groove and 3-Groove. While they will fit, I don't know if that solves your problem.

Re: Double Pulley For 250
 

https://www.12bolt.com/store/p142/Pu...Waterpump.html

And another link

https://www.12bolt.com/store/c72/PULLEY_USED.html

didn't look through them all but this one is 2 3/4 - https://www.12bolt.com/store/p673/PU...R_PUMP_PW.html
looks smaller diameter than the one I have though...

Re: Double Pulley For 250
 

Saw this post and my heart skipped a beat. I just sold a 250 double pulley on Ebay and thought it went to Oregon, but it went to Wisconsin. I know this doesn't help you, but I hate to have a buyer get something they can't use.

Re: Double Pulley For 250
 

Thanks everyone. I think I've got it figured out. Took the part number from the new and expensive pulley on 12Bolt, and was able to find a lot of options at better cost. I'll update once i get the pulley.

PN: 3995646 AH