The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 99-06 GMT800 Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)
-   -   04 Tahoe horn wiring (https://67-72chevytrucks.com/vboard/showthread.php?t=859929)

fauXGT 07-28-2025 12:31 AM

04 Tahoe horn wiring
 
After a few days of searching on the old interweb, I am getting conflicting info on what the horn wiring under the dash is. I am wanting to intercept the switch signal under the dash, but am afraid of putting a tone signal from the relay back inside to find it. I don’t want to fry the BCM, or worse the wheel air bag with how some of the schematics show it with the bags. Several versions found on line, but none have the same color wires on plugs. I’ve pulled relay to test from the wheel the ground signal when I think I have the correct wire. Am setting up for switched either factory horn or FD air horn with a tap of the wheel.

Thanks in advance. Chip

hatzie 07-28-2025 06:41 PM

Re: 04 Tahoe horn wiring
 
Try this
https://charm.li/Chevrolet/2004/Taho...al%20Diagrams/

fauXGT 07-28-2025 08:53 PM

Re: 04 Tahoe horn wiring
 
1 Attachment(s)
Well, I’ll be. That color was correct out of the column.
Black/yellow tracer. I just saw your message, and thanks for responding.
I thought by some of the schematics the wheel switch bridged somewhere to the BCM and relay. It converts from black/yellow at the column plug to black at the BCM plug.
Now reassembly tomorrow.


All times are GMT -4. The time now is 06:16 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com