The 1947 - Present Chevrolet & GMC Truck Message Board Network

I did both my doors with new latches and latch controls. I found the quality to be decent although one had a blemish in the finish. The two parts were a tight fit so I first hooked the control arm to the latch and then installed the whole thing in the door. The door closed rough at first but then I adjusted the 3 bolts on the latch control so as to remove all slack from the arm and they worked flawlessly. Apart from the small defect in the finish I feel they are decent Taiwanese replacement parts. It cost me 210 buck for both doors but my old parts rattled and vibrated so much that the quiet factor alone makes it worth it...not to mention how well the doors close....Note: The last pic showing the arm adjusment keeps posting upside down and I can't seem to turn it.