![]() |
steering column what is it???
1 Attachment(s)
|
Re: steering column what is it???
That acts as a U-joint between the steering column and the shaft to the gearbox.
It can be replaced with something like this in the link below. Just be sure to measure both ends to get the correct one. Link: https://www.summitracing.com/search/...20%28Search%29 |
Re: steering column what is it???
Quote:
|
Re: steering column what is it???
Quote:
You can move the steering wheel back and forth while the truck is sitting still and see how much slack it has in it. |
Re: steering column what is it???
Quote:
|
Re: steering column what is it???
Upgrade to a jeep one.
https://67-72chevytrucks.com/vboard/...d.php?t=783946 |
Re: steering column what is it???
Quote:
|
Re: steering column what is it???
I don't think the bolt being loose would make steering loose as I believe the coupling is splined. I'd check the steering box and front steering components, they usually wear before that coupling does. If it is the coupling you can buy them, jeep sites usually are cheaper than other sites.
http://www.quadratec.com/products/918018_02.htm or complete coupling http://www.quadratec.com/products/918018_06.htm You'll need to double check the spline sizes, I think jeep has one size for manual steering and another for power. Not sure about the Chevy trucks. Good luck, Rg |
Re: steering column what is it???
Thanks!!!
|
Re: steering column what is it???
Also check frame where steering box is mounted. My frame cracked and made noise and some slack. Had to have it welded. Was not a cheap weld either.
|
Re: steering column what is it???
anyone know what size sockets for that jeep shaft?
|
| All times are GMT -4. The time now is 02:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com