My truck is K10 and manual 4 speed trans
 

I am having problems shoving the clutch peddle to the floor so not to grind gears .. Any of you know of a factory or home made extention of 1 and half inch , maybe 2 inch something that can attached to the clutch peddle to fix my problem ?

Re: My truck is K10 and manual 4 speed trans
 

Is this piece for the Adjustment worn?
Link below for reference.
Link:https://www.jegs.com/i/JEGS+Performa...01030/10002/-1

Attachment 2430809

If that is worn along with the clutch pedal bushings and also the Z-bar bushings,
That would add up to a lot off slack in the system.

You may have already checked these things.
Just trying to help.;)

Re: My truck is K10 and manual 4 speed trans
 

Thanks ,, that is an idea to check on.. that is if it can be adjusted to not make my clutch hit all the way to the floor board so to keep the gears from grinding ,, then, that would help me some and maybe a lot..

Re: My truck is K10 and manual 4 speed trans
 

I saw your other thread about the clutch bothering you. A hydraulic conversion wouldn't be cheap but might fix your problems.

Re: My truck is K10 and manual 4 speed trans
 

Well ,, my leg is not going to grow longer so just maybe ?

Re: My truck is K10 and manual 4 speed trans
 

x2. Check all this before throwing parts at it.

Re: My truck is K10 and manual 4 speed trans
 

thanks .. I will do that

Re: My truck is K10 and manual 4 speed trans
 

You may have an issue with the fork as well.