Square Body Sway Bar on 64 C10
 

I recently picked up a 1.063" (27mm) square body sway bar with all the mounting brackets etc. to install on my 64 C10.

Unfortunately it didn't come with the required hardware for bolting the brackets to the frame and the bushings to the control arms.

Can anyone confirm the bolt sizes?

Re: Square Body Sway Bar on 64 C10
 

The OE stands were riveted to the frames but 3/8" bolts will retail them just fine. The sway bar bushing shells are also typically 3/8" hardware as well.

Re: Square Body Sway Bar on 64 C10
 

Thank you!