The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - MS WTB. Rear 4:11 k20 or k30 axle. (https://67-72chevytrucks.com/vboard/showthread.php?t=861083)

Awann99

10-08-2025 05:12 PM

WTB. Rear 4:11 k20 or k30 axle.

Howdy.
I'm looking for a 4.11 Eaton, Dana 60, or 73-87 k30 14 bolt FF to replace my Dana 60 that let loose last week. It must be a k20 or k30 axle. I don't have a way to reweld perches at the moment. I found one in North Carolina but I'm working in Columbus Ms right so I and wanted to see if anyone had one a little closer before I make that drive.
Thanks.

Awann99

10-20-2025 08:31 PM

Re: WTB. Rear 4:11 k20 or k30 axle.

Ttt

jerry moss

10-22-2025 10:36 AM

Re: WTB. Rear 4:11 k20 or k30 axle.

too bad you're on the wrong side of the country, i have a dana 60 out of a 71 GMC 3/4 ton 4x4 with 4:10 gears i will sell cheap if you have some way to get it.

Awann99

10-23-2025 06:19 AM

Re: WTB. Rear 4:11 k20 or k30 axle.

Quote:

Originally Posted by jerry moss (Post 9407727)

too bad you're on the wrong side of the country, i have a dana 60 out of a 71 GMC 3/4 ton 4x4 with 4:10 gears i will sell cheap if you have some way to get it.

I wish you were closer. I think there were so many more 4x4 trucks sold out west. They seem to be harder to find in the south.

Gyrine

10-25-2025 05:52 PM

Re: WTB. Rear 4:11 k20 or k30 axle.

I have an HO52...not sure the gear ratio...I am located in Huntsville Alabama. If you are interested, I can try to figure out the ratio.

Awann99

10-27-2025 06:13 AM

Re: WTB. Rear 4:11 k20 or k30 axle.

Axle found.

All times are GMT -4. The time now is 10:12 PM.