The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Door mounted review mirrors?? (https://67-72chevytrucks.com/vboard/showthread.php?t=861652)

cag	11-19-2025 08:04 AM

Door mounted review mirrors??

looking to mount the three bolt mirrors on my doors that didn't have them, is there a template for drilling the holes in the correct location?

SkinnyG

11-19-2025 11:00 AM

Re: Door mounted review mirrors??

I made a template in paper referencing the holes on the driver's side, then flipped it over and used it on the passenger side.

You likely already have a reinforcement inside the door.

forestb

11-19-2025 04:34 PM

Re: Door mounted review mirrors??

The drivers side should even have nuts inside. I would definitely take a look inside the door before you start drilling.

AcampoDave

11-20-2025 12:33 AM

Re: Door mounted review mirrors??

Quote:

Originally Posted by forestb (Post 9411524)

The drivers side should even have nuts inside. I would definitely take a look inside the door before you start drilling.

yep I was just thinking the same, I think they all had a driver's side mirror.

SkinnyG

11-20-2025 11:15 AM

Re: Door mounted review mirrors??

My passenger side ('61, original door) had a reinforcement plate, but no nuts. I used nutserts.

All times are GMT -4. The time now is 07:49 PM.