The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 1 of 3

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - My Sons New Engine is on its way (https://67-72chevytrucks.com/vboard/showthread.php?t=862119)

1970 CST Short Wide

12-24-2025 12:44 AM

My Sons New Engine is on its way

1 Attachment(s)

427 Small Block 560 HP 570 Torque. Should be here next week

SRU1436

12-24-2025 01:41 AM

Re: My Sons New Engine is on its way

Woah, damn that’s awesome. What is it going into?

Palf70Step

12-24-2025 04:31 AM

Re: My Sons New Engine is on its way

That should make his truck scoot!

Sheepdip

12-24-2025 11:13 AM

Re: My Sons New Engine is on its way

No Replacement for Displacement!! Bad Boy right there.

SCOTI

12-24-2025 11:21 AM

Re: My Sons New Engine is on its way

I researched those for my Malibu. They're not too far (road trip distance) but never could decide. Please post up (or PM) your experience/opinion once you move forward.

MySons68C20

12-24-2025 11:50 AM

Re: My Sons New Engine is on its way

Beautiful!!

Shark_13

12-24-2025 12:45 PM

Re: My Sons New Engine is on its way

Wow. That'll be fun!

1970 CST Short Wide

12-24-2025 01:38 PM

Re: My Sons New Engine is on its way

1 Attachment(s)

Quote:

Originally Posted by SRU1436 (Post 9415875)

Woah, damn that’s awesome. What is it going into?

Going in his GMC. The one he just cut down to a Short Bed

SRU1436

12-24-2025 02:14 PM

Re: My Sons New Engine is on its way

Quote:

Originally Posted by 1970 CST Short Wide (Post 9415934)

Going in his GMC. The one he just cut down to a Short Bed

Nice, that should be great. I’m curious about how the motor is going to perform. In the near future I’ll be in the market for a new motor for my chevelle. Please keep us informed.

Getter-Done

12-24-2025 02:14 PM

Re: My Sons New Engine is on its way

Very nice.:metal:

I am not a Podiatrist by no means.
I can see foot issues in your son's near future. ;)

:burnout::burnout::burnout:

Shifty One

12-24-2025 03:09 PM

Re: My Sons New Engine is on its way

https://i.imgur.com/vDNywys.png

MySons68C20

12-24-2025 03:29 PM

Re: My Sons New Engine is on its way

What's the dyno graph look like?

truckster

12-24-2025 03:39 PM

Re: My Sons New Engine is on its way

What's the plan to get the power to the ground? Replacing tires is going to get expensive.

SCOTI

12-24-2025 03:45 PM

Re: My Sons New Engine is on its way

1 Attachment(s)

Quote:

Originally Posted by MySons68C20 (Post 9415954)

What's the dyno graph look like?

My guess is somewhere in this neighborhood depending on the cam choice.....

1970 CST Short Wide

12-24-2025 09:25 PM

Re: My Sons New Engine is on its way

Quote:

Originally Posted by MySons68C20 (Post 9415954)

What's the dyno graph look like?

I’ll post it as soon as it gets here.

1970 CST Short Wide

12-24-2025 09:27 PM

Re: My Sons New Engine is on its way

Quote:

Originally Posted by Getter-Done (Post 9415939)

Very nice.:metal:

I am not a Podiatrist by no means.
I can see foot issues in your son's near future. ;)

:burnout::burnout::burnout:

He was Ca State Champion in B Modified Dirt cars in 2019. His foot is already permanently infected

Getter-Done

12-24-2025 09:32 PM

Re: My Sons New Engine is on its way

Quote:

Originally Posted by 1970 CST Short Wide (Post 9415999)

He was Ca State Champion in B Modified Dirt cars in 2019. His foot is already permanently infected

:haha::haha::haha:

wuzbie

12-25-2025 07:34 PM

Re: My Sons New Engine is on its way

Simply put, WOW!

SRU1436

12-25-2025 08:43 PM

Re: My Sons New Engine is on its way

Quote:

Originally Posted by 1970 CST Short Wide (Post 9415934)

Going in his GMC. The one he just cut down to a Short Bed

If you don’t mind me asking, where did your son get the bed cut down? A shop or did you guys do it yourself?

1970 CST Short Wide

12-25-2025 11:10 PM

Re: My Sons New Engine is on its way

Quote:

Originally Posted by SRU1436 (Post 9416085)

If you don’t mind me asking, where did your son get the bed cut down? A shop or did you guys do it yourself?

I wish I could take credit for it. A guy in Stockton did it in one day, drove it up one day and picked it up the next $4000 Start to Finish. Superior workmanship

zicc1835

12-26-2025 07:47 PM

Re: My Sons New Engine is on its way

Quote:

Originally Posted by 1970 CST Short Wide (Post 9415934)

Going in his GMC. The one he just cut down to a Short Bed

that will be hauling A$$ if don't mind me asking who's wheels are those?

57taskforce

12-26-2025 08:04 PM

Re: My Sons New Engine is on its way

Quote:

Originally Posted by 1970 CST Short Wide (Post 9416099)

I wish I could take credit for it. A guy in Stockton did it in one day, drove it up one day and picked it up the next $4000 Start to Finish. Superior workmanship

lol he probably learned that shortening technique on the bed here on the board. There was a guy here closer to 10 years ago that did his that way, that thread blew everyone’s mind at the time. That was the first time any of here had seen it. It does make a lot nicer finished product with way less feet of weld.

1970 CST Short Wide

12-26-2025 11:46 PM

Re: My Sons New Engine is on its way

1 Attachment(s)

Quote:

Originally Posted by zicc1835 (Post 9416179)

that will be hauling A$$ if don't mind me asking who's wheels are those?

Wheels are US Mag Rambler, same wheels I have on my truck. His centers are black , mine are gray

MikeB

12-27-2025 12:00 AM

Re: My Sons New Engine is on its way

Crazy! :eek:

SRU1436

12-27-2025 01:37 AM

Re: My Sons New Engine is on its way

Quote:

Originally Posted by 1970 CST Short Wide (Post 9416196)

Wheels are US Mag Rambler, same wheels I have on my truck. His centers are black , mine are gray

Beautiful truck.

All times are GMT -4. The time now is 03:56 AM.

Page 1 of 3

Show 40 post(s) from this thread on one page