1967 Chevy K20 Dana 44 Closed Knuckle Axle and 3rd Member
 

Closed knuckle dana 44 out of a 1967 Chevy K20. Completely rebuilt / restored from hub to hub. All new brake drums, wheel cylinders, shoes, and lines. All the tire rod ends are brand new along with the steering damper. Locking hubs rebuilt and all new U-joints and wiper seals as well. I decided to go with an open knuckle power steering setup for my truck after I rebuilt this axle. The front steering arm has been reamed to accept later model 3 piece style drag link. Looking to get $500 for the axle. I also have the rear 3rd member that goes with it that has some pitting, but is otherwise a good unit. Both are geared with 4.56's. Looking for $100 for the rear end.

These are located in AZ (85383) and would need to be picked up here as I have no way to ship them.

Thanks, Clay