![]() |
Surburban or cut them down for a Blazer legs
4 Attachment(s)
New pictures of both legs. $250 plus shipping. Postal Money Order Only. See original posting on 11-20-25.
|
Re: Surburban or cut them down for a Blazer legs
ttt
|
Re: Surburban or cut them down for a Blazer legs
if you have a set for blazer i will take them
|
Re: Surburban or cut them down for a Blazer legs
is this one blazer bracket and one suburban bracket?
|
Re: Surburban or cut them down for a Blazer legs
PM sent.
|
Re: Surburban or cut them down for a Blazer legs
Those are for narrow 2nd seat when the truck came with a 3rd seat. The curvature of the floor has to have a shorter leg. If a long second seat without 3rd seat both those legs would be the same length.
|
Re: Surburban or cut them down for a Blazer legs
The third seat in a suburban is the same as the rear seat in a blazer. The leg length of these are for the second seat of a suburban which sets lower. They can be cut down in length to fit the blazer rear seat. The suburban second seat came in two different length a shorter one if there was a third seat.
|
Re: Surburban or cut them down for a Blazer legs
Thanks for the message Dan. Looking at the pic you had my initial thought was the difference in leg length was bigger than I rememberberd. But has been at least 30 years since I bolted those down in my truck
|
Re: Surburban or cut them down for a Blazer legs
ttt
|
| All times are GMT -4. The time now is 07:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com