Looking for quality replacement mirrors that dont vibrate
 

Hey folks,

Looking for quality replacement mirrors that aren't going to surface rust or vibrate.

Im looking for a larger mirror aprox 5x7. Not going with the small rounds or the tripod mounts.

Anyone know of some?

Re: Looking for quality replacement mirrors that dont vibrate
 

I ran something similar to this which still vibrated a lot, but ran a rubber isolated round blind spot mirror inside of it that was very clear.

Re: Looking for quality replacement mirrors that dont vibrate
 

I have a pair of mirror heads just like in the set above that I'm going to use on the stock arms. I'm sure they will vibrate from wind buffeting.

Re: Looking for quality replacement mirrors that dont vibrate
 

Check out mike billet mirrors. Very nice mirrors that work!

Re: Looking for quality replacement mirrors that dont vibrate
 

Those are nice. I didn't know anyone even made a custom arm for the 67-69.

Re: Looking for quality replacement mirrors that dont vibrate
 

I bought a pair of these from Classic Industries for my base stock arms. They're not stock looking but at least I can see where I've been. They seem like pretty good quality.


CX1147 ea 47-72 TRK OUTR MIR HD STNLSS 2 2 $18.99 $37.98

Re: Looking for quality replacement mirrors that dont vibrate
 

Do you have a pair of his mirrors? Which ones did you go with?

Do you get any vibrating while driving?

Re: Looking for quality replacement mirrors that dont vibrate
 

I replaced the mirrors the mirrors on my Burban with ones from NAPA. I believe the old ones were from LMC. The PO installed them. One of the benefits of the NAPA replacements is much reduced vibrations. Go to post 831 in the link.

https://67-72chevytrucks.com/vboard/...irrors&page=34

In the first photo shows the old mirror on the left and the NAPA one on the right. The one on the left is a pretty common aftermarket mirror.

I would recommend not using the supplied bolt as it will rust up fairly quick. The other thing is the factory mirrors used a 1/4-20 and the NAPA one uses 5/16-18 bolts.

Re: Looking for quality replacement mirrors that dont vibrate
 

They’re a little big but are somewhat period-correct

Search on eBay for “Roberk mirrors”

There are a lot of old vintage styles that come up.