15x8 truck rally to 15x10
 

Hi guys, my 69 c10 has 15x8 truck rally wheels (4.0” BS) with 275/60/15 BFG tires all around.

I am very fond of the 15x10 look on the rears (BS of around 4.25”). I’m hoping you guys can provide some feedback to what my options are.

Does anyone around the country modify the stock wheels that can take my wheels and widen them 2 inches? Backspacing of anywhere between 4.0-4.5” should be fine.

I think Wheel Vintiques makes a 15x10 truck rally but I’m not sure how closely they match to my front wheels (15x8 truck Rally). Thank you

Re: 15x8 truck rally to 15x10
 

I had Stockton Wheel rehoop some 15x8 Rally wheels to convert them to 15x7. They weren't cheap, but they turned out great.

https://www.stocktonwheel.com/

Re: 15x8 truck rally to 15x10
 

Cool. I didn't know they were out there.
Thanks

Re: 15x8 truck rally to 15x10
 

I widen my own:

https://www.g3gm.com/t9331-how-i-did...wheels-at-home

K

Re: 15x8 truck rally to 15x10
 

Another thread:

https://67-72chevytrucks.com/vboard/...ighlight=Widen

K

Re: 15x8 truck rally to 15x10
 

Thank you, I’ve heard of these guys and actually tried calling and emailing them and never received a reply. Their Yelp reviews are pretty bad.

Re: 15x8 truck rally to 15x10
 

Love that Chevelle!

Re: 15x8 truck rally to 15x10
 

Wheels America repaired a lot of my track wheels over the years including replacing barrels. They should be able to help.

Re: 15x8 truck rally to 15x10
 

https://weldcraftwheels.com/
Getting ready to send a pair of rims there, next month.

Re: 15x8 truck rally to 15x10
 

https://www.jegs.com/i/Wheel-Vintiqu...YaAqgDEALw_wcB

5-lug 15x10

Re: 15x8 truck rally to 15x10
 

Thanks all, need 6 lug

Re: 15x8 truck rally to 15x10
 

https://cokertire.com/15x10-oe-picku...-5006044a.html

They make those too,…

Re: 15x8 truck rally to 15x10
 

https://www.speedwaymotors.com/Wheel...BS,520469.html

Speedway had them but shows out of stock now.

Re: 15x8 truck rally to 15x10
 

Wheel Vintiques is an option, do they accept oem centercaps?

Also, I think Weldcraft (if I recall) can only widen to the inside. I would need my wheels widened to the outside, not inside.

Ugh, a solution doesn’t look as straightforward as I would like.

Re: 15x8 truck rally to 15x10
 

OE 6 lug rally wheels have 10 slots, and the 5 lug rally wheels have 16.

Re: 15x8 truck rally to 15x10
 

You sir are correct, my error.

In this case the Wheel Vintques wheels are an option. Wonder if they accept the stock center caps ?

Re: 15x8 truck rally to 15x10
 

Picture of the wheels shows the holes for the stock center caps.
At the most you would have to tap them out for the correct 5/16” bolts.

Re: 15x8 truck rally to 15x10
 

You're correct about Weldcraft.

Re: 15x8 truck rally to 15x10
 

If you are keeping the 15x8 with 275/60/15 up front what size tire would you use with the 15x10 in the rear?

Re: 15x8 truck rally to 15x10
 

Looks like US Wheel is offering the truck rally wheels now, too.

https://uswheel.com/wheel/18369/us%2...60/?finishID=2

Re: 15x8 truck rally to 15x10
 

They do, though it's a bit tougher to pull the caps off on the wider wheels.

Re: 15x8 truck rally to 15x10
 

Wider 'steelies' w/poverty or dog-dish caps (that snap over the 'nubs') are harder to pull the caps off of with the deeper centers.

A truck ralley w/their bolt-on center caps would be no different removing the caps w/a deeper center vs a narrower/different size w/a shallower center.

Re: 15x8 truck rally to 15x10
 

So doing some research, the Wheel Vintiques 15x10 truck rally might be the best option but man, at $302 a pop, that aignt cheap doctors steel wheels ugh

Re: 15x8 truck rally to 15x10
 

How do you cut the wheels straight? Do you own a balancer or something? My new house should have a tire machine and balancer!

Re: 15x8 truck rally to 15x10
 

US wheel is advertising rallys now too.


https://www.uswheel.com/wheel/18369/...60/?finishID=2