The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Help with a Bracket (https://67-72chevytrucks.com/vboard/showthread.php?t=863100)

twoskies 03-10-2026 09:56 PM

Help with a Bracket
 
2 Attachment(s)
Hey
took this bracket off and cannot remember it went
pretty sure it was under the dash on drivers side, but im not sure

usually good at pictures, but this one i did not

pictures would help if you have them

Thank,s for any help

norcalcap 03-11-2026 12:45 AM

Re: Help with a Bracket
 
Is this the bracket that mounts between the dash and the A pillar, holds the dash in place? I didn't remove my dash but it looks kinda familiar. Has the curvature of the dash. Just a guess

jweb 03-11-2026 03:06 PM

Re: Help with a Bracket
 
The inner fender bolt to this, near the top of the firewall ( under the dash). It's common for them to fall off.

twoskies 03-17-2026 10:26 PM

Re: Help with a Bracket
 
1 Attachment(s)
Ok
Thanks for the replies
and Yes it is the support on the inside for the inner fender on the Drivers side

Got another Question, is there supposed a similar bracket under the dash on the Passenger side or is it supported by something else

if i cant find one, im sure i could make one out of flat steel that would work

Thank,s

jweb 03-19-2026 11:50 AM

Re: Help with a Bracket
 
You should have the same style for the Pass side.


All times are GMT -4. The time now is 02:20 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com