The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Wrangler Truck owners (https://67-72chevytrucks.com/vboard/showthread.php?t=91758)

Cooter_01

02-21-2004 10:06 PM

Wrangler Truck owners

any of you guys replaced the brake lines on yours and if so what size of brake line did you use

:canada:

Jason Spears

02-21-2004 11:11 PM

The size depends upon which line you are replaceing. If I remember correctly the line going from the combination valve at the front to the rear axle is 1/4" and all the other lines are 3/16".

Grim Reaper

02-23-2004 12:19 PM

Re: Wrangler Truck owners

Quote:

Originally posted by Cooter_01
any of you guys replaced the brake lines on yours and if so what size of brake line did you use

:canada:

This sounds expensive but when you concider that it's dead right and has the correct fittings it's worth the expense. www.inlinetube.com
You can get stainless and not have to worry about the salt.

All times are GMT -4. The time now is 03:00 AM.