Power window switches.
 

:bowtie: I'm thinking about getting power windows for my 1972 K10. I have heard that somebody makes a factory looking crank hand that is actually the switch to make the windows go up or down. With this type of switch you would not be able to tell you have power windows. I'm looking to find out who might be selling these switches. Please include web sites if you can.

Here is a source for everything you need, and I believe they also carry the handle style switches. You might use Search and look through back posts on this topic. From what I have read in the past, this is the kit to use. I know there has been some good info on both this company and the install posted on this board in the past.

If you do it, and you are able to take pics, I'm sure there would be some interest in a step-by-step installation process.

Only problem I see with those switches is if somebody doesn't know about the power windows and tries to crank the window down or up...


Chuck

Thanks LB, I didn't see the switches on there site but I did email them asking if they have them, I'm waiting for there reply. Also tried the search with no luck?

autothisworld has them 1-866-866-1315. If you pick up any streed rod mag you can find them. I went with the A-1 power windows :) All you have to do is cut the crank hole to make the switches fit. I used the GM style. And drill some holes for the wirses to pas from the door to the cab. They work very good.If you get the relay too ther is nothing else to buy, they giv you everything.

I think I found some. $200.00 for the set (two switches) The place is hot rod usa or hot tronics, not sure hope the hyper link comes through. hottronics or hot rod usa?

Auto loc has the power window crank, it is always shown in Custom Classic Trucks, and Classic Trucks. However they did not show it on their web site, www.autoloc.com