WTB: 67 or Older 3spd BellHousing & M22 Muncie with shfter and linkgs around MN
 

I am looking for a 67 or older truck 3spd bellhousing along with a Muncie M22. Looking to do a swap in my truck this spring and I'm just starting to gather parts. Has anyone done this swap? If I have the correct bellhousing I shouldn't have to put in a X=member underneath the tail of the trans should I? Also I should be able to get away with my regular driveshaft, just have to switch slip-yokes right? Why do I see a project like this getting too exspensive and out of hand??? :rolleyes:

Joe

ttt

Didn't this series truck come stock with the bellhousing mounts? The 60-66 series did. I've owned a few 60-66 with manual transmissions that had the engine side mounts and bell housing mounts that worked okay.

I have a cast iron bellhousing if your are interested. The shipping might be brutal though.

maybe I can help...
 

I have a few of those granny first gear + 3 regular...is that the bellhousing your needing? if so I have a few and can get to Sioux Fall S.D. for free... my company goes to Sioux Falls every friday...parts there monday...
Let me know if I can help...