The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - Help! Door Gasket Removal (https://67-72chevytrucks.com/vboard/showthread.php?t=98660)

Doug M

04-05-2004 12:53 PM

Help! Door Gasket Removal

Does anyone have tips on removing and replacing of the door rubbers? They have been on along time and there has to be a trick. Solvent? Heat?

Thanks for the help.

fine69

04-05-2004 01:16 PM

Just use a sharp putty knife. Razor blade knife. Seemed to be the best way i found.

Castiron9

04-05-2004 01:36 PM

1 Attachment(s)

I just started to replace mine....Sharp razor and the scrapped old glue..Cleaned it up with a thinner solvent ...Glued new ones in and used a tip from FRANK'S...Bought me a box of the big clips to hold it in place while it set......

Doug M

04-05-2004 01:39 PM

Thanks for the tips. I'm raiding the office supply cabinet!

Hotrod70C10

04-05-2004 07:26 PM

Quote:

Originally posted by Castiron9
I just started to replace mine....Sharp razor and the scrapped old glue..Cleaned it up with a thinner solvent ...Glued new ones in and used a tip from FRANK'S...Bought me a box of the big clips to hold it in place while it set......

Nice idea... I wish I would have seen this back when I put mine on. I had to stand there and hold it while it dried.

All times are GMT -4. The time now is 06:18 AM.