The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   free 68 parts (https://67-72chevytrucks.com/vboard/showthread.php?t=98784)

jostrans68 04-06-2004 12:58 AM

free 68 parts
 
1 Attachment(s)
These are all repairable I just bought new the drivers fender has small rust by the door area the pass the lower front corner and the hood the lip over the battery the grill has a small hole on top where a screw from bug sheild rubbed thru it , I know some guys like to repair oem rather than after market. I also have a 4speed that is free and any of the 6 lug front end stuff before I cut it up and chuck it.

jostrans68 04-06-2004 01:01 AM

1 Attachment(s)
rust on fender

jostrans68 04-06-2004 01:03 AM

1 Attachment(s)
suspension drums were good when parked

67ChevyC10Stepside 04-06-2004 02:16 AM

i would like to have those just how can i get them? :(

67ChevyC10Stepside 04-06-2004 02:17 AM

i want the grille!

jostrans68 04-06-2004 02:37 AM

sorry guess I should have been clear I have no time to ship these I am doing the spring cleaning for the wife its either give them away or they go to scrap thanks

stllookn 04-06-2004 04:18 AM

I can use them...sent you a pm.

Dan72cst 04-06-2004 09:55 AM

THANKS !!!!!!
 
Wow, jostrans68 gave me a 68 air cab, doors and fenders a few years back and now he is giving away all this. Thats almost a whole truck for free. Thanks jostrans68 as you are a top notch guy.

jostrans68 04-06-2004 11:29 AM

No problem I just would rather see some one use this stuff than waste it and they guys here on this board have been great and a lot of help.....Jack

67ChevyC10Stepside 04-06-2004 02:52 PM

i want the grill please please please

crazy4chevs 04-06-2004 03:13 PM

stllookn,you beat me to them. How did I miss this thread?
:confused:

stllookn 04-06-2004 04:01 PM

crazy4chevs, I am guessing that I don't have enough to do and spend too much time on this site! You know how much I love that sheet metal work...LOL! I have 2 fenders that, when combined with these, should give me good fenders on all three of my trucks. Right now I don't have one decent front clip between my three trucks! It is a shame!

I am missing a couple of brake drums too so I might be getting some other useable parts! I am just trying to get one runner to drive to Monroe next month for the 2nd Annual Road Flare Barbeque!

crazy4chevs 04-06-2004 04:41 PM

stllookn, do you have any pics of your sheetmetal/welding work?


jostrans68 I dont mean to hijack your post.

theo goebel 04-06-2004 11:53 PM

Monroe swamp meet and 2nd annual Road Flare BBQ
 
Quote:

[i]Originally posted by stllookn: I am just trying to get one runner to drive to Monroe next month for the 2nd Annual Road Flare Barbeque! [/B]
Mike: when is the Monroe event and where do you find out about all this stuff..........I know in Oregon the Sat. Oregonian automotive section lists all the cruse ins and swamp meets but the PI only has a Auto section on Friday's that does not list anything................................theo

jostrans68 04-10-2004 11:17 PM

no one has shown up yet I will give this stuff till monday then it hits the scrap trailer. Again for the select few whod didnt understand my first posts this is free but has to be picked up under no conditions do I have time to ship, Thanks for looking Jack

jostrans68 04-11-2004 05:18 PM

gettin ready to fire up torch tommorow is d day:crazy:

67ChevyC10Stepside 04-11-2004 06:33 PM

what a shame :( :banghead:

RooRDaDDy 04-12-2004 01:18 AM

dont cut
 
hey jos i believe me and crazy will come out and pick them up tuesday if u can wait that long

67ChevyC10Stepside 04-12-2004 01:47 AM

if you go to get those parts will you sell me the grill and ship it? i need one bad

crazy4chevs 04-12-2004 02:11 AM

jostrans68, I tried to p/m you but your p/m is full.
I'll talk to roordady and see if we can get down to get them(my truck isnt on the road yet).
i will let you know as soon as I find out. thanks,Lance

jostrans68 04-12-2004 06:09 PM

yea thats fine call me at 2535319101 ill be home around 5 or call at work 2534458090 ask for Jack in hunting and fishing thanks

jostrans68 04-13-2004 11:35 PM

thanks Guys
 
well all the stuff in the 1st pic is gone met a couple great board members today. I will for another week or so have the front drums etc plus it has a good set of trailing arms if some one wants to come pull them I can take pics, there is a bed on the frame that has one good bedside and one needs repair front rusted behind cab all of this is FREE again I cannot ship so come and get it thanks Jack
Nice meeting crazy4chevs and RooRdaddy

jostrans68 04-13-2004 11:52 PM

forgot
 
It also has a good 4 speed granny tranny and I have a bench seat that is in ok shape needs cover but its a fold forward seat
these are also free with no shipping thanks Jack

crazy4chevs 04-14-2004 01:52 AM

jostrans68, Nice meeting you and thanks for the parts. Im sure we can put them to good use. ROORDady wants the trailing arms so i'll speak up for him, he can pull them. We can call to set a time and day. This board has great members. again, thanks a bunch.

RooRDaDDy 04-14-2004 02:05 AM

NICE GUY
 
Hell ya man was great to meet you and the hood is already on crazys's truck hehe thx again will get ahold of u to get them trailin arms for sure friend gl to u on ur truck its comin along great


All times are GMT -4. The time now is 09:02 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com