The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

lost wages · 11-12-2004, 03:54 AM

ok, this should be an easy thing to put together but im lost. I have a 1 1/16 sway bar off a 69 2wd half ton. I ordered the lowered brackets from early classic and poly bushings along with the other parts i needed. It was all fine but the bar sticks out of the bushing 3-4 inches where it is mounted on the control arm and rubs my air bag. i have turned the bar and brackets different ways with no solution. WTF am i missing? i knocked the rivets out of the crossmember and have studied the FAQ section with the write up on this swap.

11-12-2004, 03:54 AM	#1
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	sway bar help ok, this should be an easy thing to put together but im lost. I have a 1 1/16 sway bar off a 69 2wd half ton. I ordered the lowered brackets from early classic and poly bushings along with the other parts i needed. It was all fine but the bar sticks out of the bushing 3-4 inches where it is mounted on the control arm and rubs my air bag. i have turned the bar and brackets different ways with no solution. WTF am i missing? i knocked the rivets out of the crossmember and have studied the FAQ section with the write up on this swap.