The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

fatfords · 11-17-2004, 04:39 PM

You can get the metal crimp contact from Mad Electrical http://www.madelectrical.com/catalog/flat-blade.shtml

Part number 56F is what you will need. The plastic part can be made from most any single wire female connector housing by cutting a groove in one side of the plastic so the pin contact can slide into the female contact.

Good Luck!

11-17-2004, 04:39 PM	#6
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	You can get the metal crimp contact from Mad Electrical http://www.madelectrical.com/catalog/flat-blade.shtml Part number 56F is what you will need. The plastic part can be made from most any single wire female connector housing by cutting a groove in one side of the plastic so the pin contact can slide into the female contact. Good Luck! __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab