View Single Post
Old 11-20-2004, 10:24 PM   #3
FRENCHBLUE72
PROJECT 7DEUCE
 
FRENCHBLUE72's Avatar
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,606
Here are a few pointer's from the golden state builder's guide..
#1 make sure there is no excess caulking or paint build up between the roof and rail.
#2install the door section's first starting at the upper most corner.
#3 when the uppermost corner is in place fasten the rear mouldingall the way down to the lower edge.
#4after the rear is attached,do the same along upper edge about half way.

They suggest using a soft rubber hammer to press the moulding on firmly...

Hope this help's you out..
__________________
GO BIG GREEN GO DUCKS



MEMBER #6377

72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free.

Project "7DEUCE"

check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665



Tim Powell..R.I.P EastSideLowlife..... R.I.P..
FRENCHBLUE72 is offline   Reply With Quote