The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**crossy** · 11-25-2004, 03:41 PM

I'm sure he meant 1.60 which is the common one to use with the 2.02 intakes. A 1.94 exhaust would be into the intake port :-) .
These are common 882 heads and are decent casting for late models ones.
drilling the heads is not a big deal . I have a template for the angle. after that they can be used on a 350 with 350 head gaskets. DAVE

11-25-2004, 03:41 PM	#4
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,042	I'm sure he meant 1.60 which is the common one to use with the 2.02 intakes. A 1.94 exhaust would be into the intake port :-) . These are common 882 heads and are decent casting for late models ones. drilling the heads is not a big deal . I have a template for the angle. after that they can be used on a 350 with 350 head gaskets. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww 84,C10 SWB-Yella,stock 86 K10 SWB-Red, hopped up 305,4/S LOTS of Cummins trucks.