The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**kwmech** · 11-27-2004, 09:16 PM

Have a 69 GMC 1 ton. Soon to pull the 350 out and go to a 400sb. Also going to put TBI on it with the serpentine belt set-up. I think the serp set up pushes the fan forward about 1 to 1.5'' forward. My thoughts are to use the big block towers which will allow the use of the heavier duty motor mount. Will this put the engine back for the fan placement?

11-27-2004, 09:16 PM	#1
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,730	engine placement Have a 69 GMC 1 ton. Soon to pull the 350 out and go to a 400sb. Also going to put TBI on it with the serpentine belt set-up. I think the serp set up pushes the fan forward about 1 to 1.5'' forward. My thoughts are to use the big block towers which will allow the use of the heavier duty motor mount. Will this put the engine back for the fan placement?