I took out all the pipe from just past the T for the stock system and use pipe clamps and clamped on a flowtech Raptor muffler*$20* on * http://www.holley.com/HiOctn/ProdLin...FT/Raptor.html *. the muffler is right under my butt, then origonaly I had about 2 feet of pipe with turn down to dump it right by the tire. and used pipe clamps all the way. got pipe mostly from pepboys. sounded pretty good. got a good low rumble at idle and the faster you went the quiter it got. but now I took off about 18" so its now actualy quiter. whole thing cost me about $50 and that was winging it. if I planed it out, woulda cost me alot less lol. just my 2 cents matt
__________________
RIP ELJAY
 Work In Progress 1979 GMC C1500 Trailering Special.
Getting the truck done, one piece at a time.
“You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan
“I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby
Last edited by 79gmcc15; 12-03-2004 at 08:27 AM.
|