|
what id do
if your running compressors i wouldnt run a relay just run the compressors but buy one so it does void your warrenty and if u birn one up just tellem you used it. I have had hell with relays with them goin bad, and being some where and draggin it home which isnt fun. For a switch I just ran a hot wire from the batt. to the compressor and put a switch rught under my colum so its hidden. I wired 2 tanks the other day in a 98 chevy what I did it I took the valves and put them where I want them to be 1st which was front under the hood, and the back attached to the c notch, then I wired them to the switches, thats the hardest parts of it all. Then I mounted the tanks and ran my line for my dump I just put a 1/2 inch T for it, then finished it up by wiring the compressors and ran one to each tank and just put a line goin to each tank. I have seen alot of people just using one tank for the front, and one for the back which is even simplier. I would take the tank preasure gauge from the one with your lines coming out of it. Thats the only gauge I have.
|