[Mike C]

My buddy has built a 74 Ford Bronco. It has a 560 ci 8-71 blown big block Chevy in it. It has the stock 4 wheel drive (dana 44 front 9" rear), a Turbo 400 and a NP 205 transfer case (drivers side exit) It has a viscous coupler on the front driveshaft. It's got 31" M/T all the way around. 10.5 in the front and 14.5 in the rear. Still under construction with the blown motor, but with a normally aspirated 427 in it it ran low 12's. Start with a 4 wheel drive truck. The Sy/Ty front diff is a dinky little thing and not near wide enough. You need some sort of differentiation f/r on the street so you could run a 203 t-case.