|
I used a mid-90's K&N kit for the 5.0 Mustang. It has a verrrrry flat pancake piece that fits over the carb air horn. Then a snout comes off it and just misses the brake booster and heads forward toward the left front corner of the truck. There I have the K&N cone filter on it. I took a piece of 6" "S&D" PVC pipe and a PVC cap and made a can out of it... punched a hole in the cap that fit it over the hard plastic of the K&N snout. Then I put the filter back on and lined up everything with a 6" hole in the core support just above where the external regulator is supposed to be bolted up.
Cost? $40 on Ebay for the used Mustang piece, $3 in PVC parts, $1 for some Band-Aids and first aid cream, and voila...
Kenneth
|