|
I have SoLow lower a-arms and AirLift GenII Extreme bags up front. No brackets, I tack welded the supplied air bag plates to the lower arm, and upper crossmember. Aired out my front middle crossmember sits about 1 1/2" off the ground, with 255/55/17s on front. It handles very well.
My question is will I feel a noticable impovement in ride and handling with these ART arms? And how low will they go? Anyone have any pics of these installed? Do they provide more ground clearance under the arm, aired out? My lower arms hit the ground if I dump all the air, from full ride height, while moving.
Also SCOTI made a good point.
"The problem (for me) w/these arms is they actually correct alignment issues by making the upper arms longer, thus not requiring 'excessive' shims. That does me absolutely zilch good because w/longer arms my wheels/tires will be rubbing the outer edges of the fender-lip & wheel-well."
As I plan on going with 20X9 all the way around. And clearance will be a problem. Although I'm going to have to remove my iner fenders when I step up to 20s. What are all your thoughts on this?
|