The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Bagd72Chevy · 12-19-2004, 10:59 PM

fronts are 245/40R20, and i think the rear is 255/35R20. I should have more pics up soon. Right now I'm working on the tailgate. The outside is shaved, but I decided to leave the "CHEVROLET". I made my own handle relocater kit, which was pretty hard. The main the problem is that the tailgate is so skinny. I wanted to put an s-10 handle in it with trim ring, but the s-10 handle was thicker than the tailgate was, so I relocated the stock one. Right now, I have the outside welded up, and am working on fixing the rust in the bottom. Then I'm going to finish it, prime it, re-install it, and probably look at it for awhile.

12-19-2004, 10:59 PM	#19
Bagd72Chevy C10 Collector Join Date: Oct 2003 Location: Baton Rouge, LA Posts: 418	fronts are 245/40R20, and i think the rear is 255/35R20. I should have more pics up soon. Right now I'm working on the tailgate. The outside is shaved, but I decided to leave the "CHEVROLET". I made my own handle relocater kit, which was pretty hard. The main the problem is that the tailgate is so skinny. I wanted to put an s-10 handle in it with trim ring, but the s-10 handle was thicker than the tailgate was, so I relocated the stock one. Right now, I have the outside welded up, and am working on fixing the rust in the bottom. Then I'm going to finish it, prime it, re-install it, and probably look at it for awhile.