Been asked before: MM
Well I have a question that i'm sure has been asked before...but I searched for it and can't seem to find the answer that I need:
I have a 6cly truck that will get a V-8. I know that the V-8 will mount to the 6cly stands - but may have some clearance problems with an HEI dizzy.
so the question is...on a stock V-8 truck how much further foward are the Motor mount stands than in a 6cly truck.
I noticed that there is another bolt hole further foward on the top side of the frame about 2.5" infront of the first bolt of the 6cly mount...
do i just move the mount to that position and drill a new bottom hole?
or do i have to drill some new top holes too? - and if so..what distance from the stock 6cyl holes?
Thanks guys
__________________
-'07 GMC Sierra K2500HD
-'66 C10 Suburban
-'68/'71 K20 Service Bed Project
-'69 Chevy C30 Mason Dump
-'33Ford P/U 396ChevyPowered
|