Yes it fits, and YES its TIGHT!!! I had to install the back 2 or 3 plug wires on the cap, and then tighten the cap to the distributor body. And on top of that, I had to turn the dist on direction to get to 1 of the clamps, and then turn the dist the other way to tighten the other clamp in the back. Then rotate it to the correct place...
__________________
1969 K10 - V8, 465, 205, 12 bolt, D44 2002-current
1969 K20 - V8, 465, 221, Eaton, D44 2012-current
Nothin' but drums on all 4 corners!
past horses in the stable
72 C10-short step (97-02), 68 C10-long fleet (06-12)
|