The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

72BLAZERDUDE · 12-21-2004, 10:04 AM

I thought about getting a setup from Eastwood. Problem is I would have to find an oven and get a new 220 circuit added to my house( I have added 110 circuits but never messed with 220) I wonder if a 15 inch wheel will fit in a standard oven. Is it pretty easy to get a real good finish. Doing brackets and such under the hood is one thing but a set of wheels that are going to show is another. Just dont know if it is worth trying to do myself. I have heard that the stuff is a bear to get off if you screw it up. If you use a lamp do you just move it around to cover the whole area. How is the finish on areas that overlap and also how much overspray is there.

12-21-2004, 10:04 AM	#7
72BLAZERDUDE Registered User Join Date: Jan 2002 Location: WATAUGA,TX Posts: 675	I thought about getting a setup from Eastwood. Problem is I would have to find an oven and get a new 220 circuit added to my house( I have added 110 circuits but never messed with 220) I wonder if a 15 inch wheel will fit in a standard oven. Is it pretty easy to get a real good finish. Doing brackets and such under the hood is one thing but a set of wheels that are going to show is another. Just dont know if it is worth trying to do myself. I have heard that the stuff is a bear to get off if you screw it up. If you use a lamp do you just move it around to cover the whole area. How is the finish on areas that overlap and also how much overspray is there. __________________ 72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA Last edited by 72BLAZERDUDE; 12-21-2004 at 10:08 AM.