|
by looking at it, it looks like he used a hydraulic ram, most likely tractor supply or northern tool, and it seems that its a dana 60 rear from what he said, and im guessing that he took the internals and knuckles and spindles from a front D60, put in the D60 internals, and flipped the knuckles and spindles from driver side to pass, and pass to driver side, so that the draglink and all is on the rear side, and pretty much he could not use a front axle in reverse due to the rotation of the wheels, so pretty much it looks like he made a reverse rotation front D60
thats my guess as to how he did it
|